Crow Cams 130# Valve Springs

Crow Cams 130# Valve Springs

$149.99

Part Number: VSS-130

Shipping Weight: 2.50 pounds

0 Customer Reviews
Be the first to write a customer review

Sorry, we are currently out of 'Crow Cams 130# Valve Springs'.
Package type:

Quantity:

Share with a friend

APPLICATIONS:

  • 1995-2003 Bonneville with 3800 Series II engine
  • 1996-2002 Camaro with 3800 Series II engine
  • 1996-2002 Firebird with 3800 Series II engine
  • 1997-2004 Grand Prix with 3800 Series II or Series III engine
  • 2000-2004 Impala with 3800 Series II engine
  • 1998-1999 Intrigue with 3800 Series II engine
  • 1996-2003 LeSabre with 3800 Series II engine
  • 1998-2000 Lumina with 3800 Series II engine
  • 1998-2003 Monte Carlo with 3800 Series II engine
  • 1995-1999 Oldsmobile 88 with 3800 Series II engine
  • 1996-1996 Oldsmobile 98 with 3800 Series II engine
  • 1995-2003 Park Avenue with 3800 Series II engine
  • 1995-2003 Regal with 3800 Series II engine
  • 1995-2004 other applications with 3800 Series II or Series III engine

Crow Cams manufactures these beehive shape ovate wire valvesprings specifically for the LS1 engine found in the Camaro and Firebird; however through extensive research we have found them to be a perfect match for the 3800 Series II and III engines for higher lift applications such as aftermarket camshafts. These high load springs can be used in high performance and racing applications up to .640" lifts. These valvesprings will fit stock L36, L26, L67, and L32 cylinder heads with no machining, and fit right into stock valvespring seats.

We recommend the VSS-130 for engines with agressive cams such as the INTENSE™ Stage 2-3 grinds.

We also recommend using a double-roller timing chain with 130# or higher springs.

VSS-130 Specifications:

  • Installed load is 130 pounds at 1.800", 150 pounds at 1.720", and 318 pounds at 1.200".
  • Coil bind height is 1.080".
  • Outside diameter is 1.290"/1.060" and inside diameter is .885"/.656".
  • Maximum lift supported @ 1.72 (stock retainer install height) - .640"
  • Maximum lift supported @ 1.80 (Manley retainer install height) - .720"

Average Customer Review:

There are currently no customer product reviews for the product.

Be the first to write an online review and share your thoughts with others.

There are currently no reviews for this product.

INTENSE™ and INTENSE Racing® are Trademarks of R4 Holdings, LLC. Content and Graphics © Copyright R4 Holdings, LLC 2002-2021. All Rights Reserved.
All Third Party Names, Images and Trademarks may be the property of their respective holders.

www.INTENSE-Racing.com
Don't make excuses. Make horsepower.