ARP Connecting Rod Bolts

ARP Connecting Rod Bolts

$105.99

Part Number: CRB-0xx

Shipping Weight: 2.00 pounds

5 out of 55 out of 55 out of 55 out of 55 out of 5 1 Customer reviews
Read all reviews (or) Write a review

8 in stock
Please select your application:
CRB-067
CRB-032 (+$30.00)
Single L32 bolt ($12.99 ea)

Quantity:

Share with a friend

APPLICATIONS:

  • 1995-2004 Bonneville with 3800 Series II engine
  • 1996-2002 Camaro with 3800 Series II engine
  • 1996-2002 Firebird with 3800 Series II engine
  • 1997-2004 Grand Prix with 3800 Series II or Series III engine
  • 2000-2004 Impala with 3800 Series II engine
  • 1998-1999 Intrigue with 3800 Series II engine
  • 1996-2004 LeSabre with 3800 Series II engine
  • 1998-2000 Lumina with 3800 Series II engine
  • 1998-2004 Monte Carlo with 3800 Series II engine
  • 1995-1999 Oldsmobile 88 with 3800 Series II engine
  • 1996-1996 Oldsmobile 98 with 3800 Series II engine
  • 1995-2002 Park Avenue with 3800 Series II engine
  • 1995-2002 Regal with 3800 Series II engine
  • 1995-2004 other applications with 3800 Series II or Series III engine

These Connecting Rod Bolts are designed by Automotive Racing Products for the most severe applications. These ultra heavy-duty rod bolts are made from a special material designated "ARP®2000." It has approximately 200% the fatigue life of 8740 chrome moly steel, has a tensile strength of about 200,000 psi and is capable of more than 12,000 pounds of clamping force.

CRB-067 - fits 3800 Series II engines with L36 or L67 connecting rods, carded set of 12

CRB-032 - fits 3800 Series II or Series III engines with L26 or L32 connecting rods, set of 12 (+$30.00)

CRB-032_Single - replacement L26/L32 ARP bolt, two needed per conn rod, sold in singles.

IMPORTANT NOTES:

  • CRB-067 bolts should be torqued to 55 ft-lbs with a few drops of motor oil or assembly lube on the threads. CRB-032 bolts should be torqued to 45 ft-lbs.

  • Clevite 77® TriMetal™ Rod Bearings are strongly recommended with the INTENSE™ Connecting Rod Bolts

  • While the bolts can be installed with new connecting rods as-is, we recommend honing the big end of the rods with the bolts torqued due to greater clamping force than stock TTY.  This is especially recommended for high-HP or racing applications with tighter tolerances.
     



    ARP Connecting Rod Bolts come in sets of twelve.
  • Average Customer Review: 5 out of 55 out of 55 out of 55 out of 55 out of 5 Based on 1 Reviews

    Write a Customer Review and share your thoughts with others.

    5 out of 55 out of 55 out of 55 out of 55 out of 5 Solid setup, easy installation, 10/10 on looks

    Chris Perry (Bowling green, VA) 2.24.2023

    Was a little worried at first because these bolts looked way different from the factory ones, after a call to intense racing, I was assured that they would work perfectly and fit better than factory… they weren’t wrong!! These bolts snugged up perfectly with my clevite rod bearings and look much better than factory as well and are gonna hold up great with some boost!

    INTENSE™ and INTENSE Racing® are Trademarks of R4 Holdings, LLC. Content and Graphics © Copyright R4 Holdings, LLC 2002-2021. All Rights Reserved.
    All Third Party Names, Images and Trademarks may be the property of their respective holders.

    www.INTENSE-Racing.com
    Don't make excuses. Make horsepower.