CompCams Type 'R' Pro Magnum Hydraulic Roller Lifters

CompCams Type 'R' Pro Magnum Hydraulic Roller Lifters


Part Number: LSX-COMP-875-16

Shipping Weight: 7.00 pounds

0 Customer Reviews
Be the first to write a customer review


Share with a friend

Shipping Rate: Calculated at checkout

  • 1987-Current Chevrolet Small blocks originally equipped with hydraulic roller cam
  • 1997-Current LS1/LS2/LS6 equipped vehicles
  • 2008-2009 Pontiac G8 L76 (when removing AFM)
  • 2009-Current Pontiac G8 LS3
  • 2010-Current Chevrolet Camaro L99 (when removing AFM)
  • 2010-Current Chevrolet Camaro LS3
COMP CamsŪ Pro Magnum Hydraulic Roller Lifters™ are specifically designed to perform at higher engine speeds. When engines are equipped with a hydraulic camshaft, high rpm is limited by the improper position of the internal piston as the lifter inevitably "pumps up". This improper location results in open valves and therefore leads to lost power or sometimes even engine failure. NOTE: These lifters require an adjustable valve train and must be pre-loaded to .002" to .004" for proper operation!

These lifters are a perfect compliment to an aftermarket cam/stronger valvesprings combination and/or an increase in your shift points past the stock RPM.

Sold in sets of sixteen.

We are currently out of these lifters and Comp will not have more available until at least Fall 2021. All distributors are also out of stock. We suggest using our GM LS7 lifters or Comp 850 series for most street and dual-use applications.

Average Customer Review:

There are currently no customer product reviews for the product.

Be the first to write an online review and share your thoughts with others.

There are currently no reviews for this product.

INTENSE™ and INTENSE Racing® are Trademarks of R4 Holdings, LLC. Content and Graphics © Copyright R4 Holdings, LLC 2002-2021. All Rights Reserved.
All Third Party Names, Images and Trademarks may be the property of their respective holders.
Don't make excuses. Make horsepower.